Publication
NEWS
Contact US
 Search

Address:Welding Lab, Luoyu Road 1037, Wuhan, China

Phone:027-87557749

E-mail:ming.xu@hust.edu.cn



50.Bignozzi MC, Johnson JA, Krawczak P, Morallon E, Xu M. Editorial: Women in Science: Materials. Front Mater 8, 2 (2021)


49.Xie W, et al. Charge‐Gradient Hydrogels Enable Direct Zero Liquid Discharge for Hypersaline Wastewater Management. Advanced Materials, 2100141 (2021).


48. Duan J, et al. Liquid-state thermocells: opportunities and challenges for low-grade heat harvesting. Joule,  (2021).


47. Gao, X., Du, X., Mathis, T.S. et al. Maximizing ion accessibility in MXene-knotted carbon nanotube composite electrodes for high-rate electrochemical energy storage. Nat Commun 11, 6160 (2020).


46. Zhan Z, Ma Y, Ren J, Gao X, Li L Xu M. A new-structured nanocarbon cushion with highly impact-resistant properties. Carbon 170, 146-153 (2020).


45. Yu B, et al. Thermosensitive crystallization–boosted liquid thermocells for low-grade heat harvesting. Science, eabd6749 (2020).


44. Zhang M, et al. Self-Powered, Electrochemical Carbon Nanotube Pressure Sensors for Wave Monitoring. Advanced Functional Materials n/a, 2004564 (2020).


43. Cheng Z, Wang Y, Zhang W, Xu M. Boosting Polysulfide Conversion in Lithium-Sulfur Batteries by Cobalt-Doped Vanadium Nitride Micro-flowers. ACS applied energy materials 3, 4523-4530 (2020).


42. Song S, Zhao B, Xu M, et al. Plasma-assisted synthesis of hierarchical NiCoxPy nanosheets as robust and stable electrocatalyst for hydrogen evolution reaction in both acidic and alkaline media.  Electrochimica Acta,0013-4686 (2020)


41. Wang Y, Shui J, Xu M, et al. High-capacity K-storage operational to -40 °C by using RGO as a model anode material. Nano Energy, 104248(2020).


40. Zhang M, Futaba DN, Xu M, et al. A general strategy for optimizing composite properties by evaluating the interficial surface area of dispersed carbon nanotubes by fractal dimension. Carbon 154, 457-465 (2019).


39. Ren J, Xu M, et al. A graphene rheostat for highly durable and stretchable strain sensor. InfoMat 1, 396-406 (2019).


38. Wan X, Xu M, Shui J, et al. Fe-N-C electrocatalyst with dense active sites and efficient mass transport for high-performance proton exchange membrane fuel cells. Nat Catal 2, 259-268 (2019).


37. Wang X, Xu M, Yu X, et al. Vivid structural colors from long-range ordered and carbon-integrated colloidal photonic crystal. Opt Express 26, 27001-27013 (2018).


36. Liu KXu M, Wang Z, Zhou J, et al. Thermal–electric nanogenerator based on the electrokinetic effect in porous carbon film. Adv Energy Mater 8, 1702481 (2018).


35. Li J, Xu M, Zhou J, et al. Electricity generation from water droplets via capillary infiltrating. Nano Energy 48, 211-216 (2018).

​​​

34. Gao L, Xu M, Shui J, et al. Rationally assembly graphene nanoribbon/graphene framework for high volumetric energy and power density Li-ion batteries. Nanoscale 10, 7676-7684 (2018).


33. Wang Y, Shui J, Xu M, et al. From self-adaptive electrode with SWCNT bundles as elastic substrate for high-rate and long-cycle-life lithium/sodium ion batteries. Small 14, e1802913 (2018).


32. Ren J, Xu M, et al. From wheat bran derived carbonaceous materials to a highly stretchable and durable strain sensor. RSC Adv 7, 22619-22626 (2017).

​​​​​​​​​​

31. Xu M, et al. Carbon nanotube dry adhesives with temperature-enhanced adhesion over a large temperature range. Nat Commun 7, 13450 (2016).


30. Li, JH, Zhang WJ, Du X, Xu M, Qiu T, Chu PK, Tunable Ordered Silver Nano-Arrays Prepared by TiO2 Templates as Surface-Enhanced Raman Scattering Substrates. Nanosci Nanotech Let 7, 892-896 (2015).


29. Zhang W, Xu M, et al. Molecular Structure and Chemical Property of a Divalent Metallofullerene Yb@C-2(13)-C-84, J Am Chem Soc 135, 12730-12735 (2013). 


28. Wang H, Xu M, Wu Z, Zhang W, Ji J, Chu PK. Biodegradable Poly(butylene succinate) modified by gas plasmas and their in vitro functions as bone implants. ACS Appl Mater Interfaces 4, 4380-4386 (2012). 


27. Wang H, Xu M, et al. Tailoring of mesenchymal stem cells behavior on plasma-modified polytetrafluoroethylene. Adv Mater 24, 3315-3324 (2012). 


26. Xu M, et al. Alignment Control of Carbon Nanotube Forest from Random to Nearly Perfectly Aligned by Utilizing the Crowding Effect. ACS Nano 6, 5837-5844 (2012).


25. Xu M, Futaba DN, Yamada T, Yumura M, Hata K. Carbon Nanotubes with Temperature-Invariant Creep and Creep-Recovery from -190 to 970 degrees C. Advanced Materials 23, 3686-3694 (2011). 


24. Xu M, Futaba DN, Yumura M, Hata K. Tailoring Temperature Invariant Viscoelasticity of Carbon Nanotube Material. Nano Lett 11, 3279-3284 (2011). 


23. Xu M, Futaba DN, Yamada T, Yumura M, Hata K. Carbon Nanotubes with temperature-invariant viscoelasticity from -196 degrees to 1000 degrees C. Science 330, 1364-1368 (2010).


22. Wang H, Xu M, et al. Mechanical and biological characteristics of diamond-like carbon coated poly aryl-ether-ether-ketone,Biomaterials 31, 8181-8187 (2010).


21. Xu M, Zhang W, Wu Z, Pu S, Li L, Chu PK. Mechanical properties of tungsten doped amorphous hydrogenated carbon films prepared by tungsten plasma immersion ion implantation. Surface and Coatings Technology 203, pp 2612-2616 (2009).


20. Xu M, Cai X, Liu Y, Pu S, Chu PK. Tribological properties of graded diamond-like carbon films on Ti ion-implanted aluminum substrate. Diam Relat Mater 17, 1844-1849 (2008).


19. Liu C, Xu M, Zhang W, Pu S, Chu PK. Effects of tungsten pre-implanted layer on corrosion and electrochemical characteristics of amorphous carbon films on stainless steel. Diam Relat Mater 17,  1738-1742 (2008).


18. Dai H, Xu M, et al. Fabrication for multilayered composite thin films by dual-channel vacuum arc deposition. Rev Sci Instrum 79, 065104 (2008).


17. Xu M, Cai X, Zhao J, Chen Q, Chu PK. Comparative studies on influence of acetylene to argon flow rate ratios on nano-scratch behavior of a-C : H films produced on steel substrates by plasma immersion ion implantation and deposition. Thin Solid Films 516, 252-256 (2007).


16. Xu M, Zhang W, Wu Z, Pu S, Li L, Chu PK. Evolution mechanism of nanocrystalline tungsten-carbon and effects on tungsten implanted amorphous hydrogenated carbon. J Appl Phys 102, 113517 (2007). 


15. Xu M, Zhao J, Cai X, Chen Q, Chu PK. Structure and topographies of diamond-like carbon films produced on tungsten pre-implanted stainless steel substrate by plasma immersion ion implantation and deposition. Diam Relat Mater 16, 1490-1499 (2007). 


14. Xu M, Li L, Cai X, Chen Q, Chu PK. Experimental tests and numerical simulation studies on nano-indentation of TiN film deposited on N+-implanted aluminum. Surface and Coatings Technology 201,  6707-6711 (2007). 


13. Xu M, Cai X, Chen Q, Kwok SCH, Chu PK. Comparative study of mechanical properties of a-C : H films produced on tungsten pre-implanted stainless steel substrate by plasma immersion ion implantation and deposition. Diam Relat Mater 16, 1304-1311 (2007).


12. Xu M, Cai X, Chen Q, Zhao J, Chu PK. Influence of acetylene to argon flow rate ratios on structure and properties of hydrogenated amorphous carbon films produced on steel substrates by plasma immersion ion implantation and deposition. J Mater Res 22, 982-988 (2011).


11. Xu M, Cai X, Chen Q, Zhao J, Chu PK. Mechanism of enhanced adhesion between hydrogenated amorphous carbon films and tungsten preimplanted steel substrates. J Appl Phys 101, 0021-8979 (2007).


10. Xu M, et al. Nucleation and growth of amorphous carbon film on tungsten-implanted stainless steel substrates. Diam Relat Mater 15, 1580-1584 (2006).


9. Xu M, Li L, Liu Y, Cai X, Chen Q, Chu PK. Mechanism of mechanical property enhancement in nitrogen and titanium implanted 321 stainless steel. Materials Science and Engineering: A 425, 1-6 (2006).


8. Xu M, Li L, Cai X, Liu Y, Chen Q, Chu PK. Improvement of adhesion strength of amorphous carbon films on tungsten ion implanted 321 stainless steel substrate. Diam Relat Mater 15, 952-957 (2006).


7. Xu M, Liu Y, Li L, Cai X, Chen Q, Chu PK. Experimental and numerical evaluations of adhesion strength and stress in TiN films deposited on ti-implanted aluminum. Journal of Vacuum Science & Technology A: Vacuum, Suifaces, and Films 24, 212-217 (2006).


6. Liu Y, Xu M, et al. The effect of N+-implanted aluminum substrate on the mechanical properties of TiN films. Surface and Coatings Technology 200, 2672-2678 (2006).


5. Liu Y, Xu M, et al. Effects of nitrogen ion implantation and implantation energy on surface properties and adhesion strength of TiN films deposited on aluminum by magnetron sputtering. Materials Science and Engineering: A 415, 140-144 (2006).


4. Liu Y, Xu M, et al. Effects of pretreatment by ion implantation and interlayer on adhesion between aluminum substrate and TiN film. Thin Solid Films 493, 152-159 (2005).


3. Liu Y, Xu M, et al. Influence of ion energies on the surface morphology of carbon films. Surface and Coatings Technology 196, 241-245 (2005).


2. Hu Y, Xu M, et al. Transport efficiency of vacuum arc plasma in a curved magnetic filter. Review of Scientific Instruments 76, 0034-6748 (2005).


1. Li L, Xu M, et al. Evaporation-glow discharge hybrid source for plasma immersion ion implantation. Surface and Coating Technology 186, 165-169 (2004).


Your position